HERCULES TOW BAR 2
SKU:
10002
$710.00
$710.00
* 12,000 lb towing capacity
(Highest in the Industry)
* Includes safety cables
* Stows on the Motorhome
* All Steel construction
* Weighs 52 lbs
* Stainless Steel inside legs for extra durability
* All terrain style inside legs
* Fits into a standard 2” x 2” x 6” receiver
* Extra big black T-Handles to release the legs
* Lifetime Guarantee
* Has an integrated supplemental surge brake mounted into the head of the
tow bar. Our patented Ready Brake system.
* Includes all the cables for the Ready Brake
* Has a hard wired in dash light monitoring system for the Ready Brake
* Here at NSA RV Products we have determined the Ford C-Max Hybrid Energi cannot use the Ready Brake System.
This tow bar does not come with the steel clevis’ to hook to the baseplate they are an extra charge see below.
(Highest in the Industry)
* Includes safety cables
* Stows on the Motorhome
* All Steel construction
* Weighs 52 lbs
* Stainless Steel inside legs for extra durability
* All terrain style inside legs
* Fits into a standard 2” x 2” x 6” receiver
* Extra big black T-Handles to release the legs
* Lifetime Guarantee
* Has an integrated supplemental surge brake mounted into the head of the
tow bar. Our patented Ready Brake system.
* Includes all the cables for the Ready Brake
* Has a hard wired in dash light monitoring system for the Ready Brake
* Here at NSA RV Products we have determined the Ford C-Max Hybrid Energi cannot use the Ready Brake System.
This tow bar does not come with the steel clevis’ to hook to the baseplate they are an extra charge see below.
How the integrated ready brake works
When you brake while towing a vehicle behind an RV, stopping distance is increased due to the weight of the vehicle and it's momentum pushing against the RV. The ReadyBrake uses this energy to compress a shock and spring inside it which allows an actuator arm to move forward, pulling down your towed vehicle brake pedal with an attached cable. It takes a few hundred pounds of pressure to activate the ReadyBrake, so the towed vehicle will follow the RV down a steep mountain grade only applying brakes when you do. After initial install, only an adjustable sling cable is used to connect or disconnect the ReadyBrake. We recommend leaving about 2 inches of slack in the adjustable sling cable to keep the brake from activating while going over dips like at a gas station. When the RV comes to a complete stop the ReadyBrake actuator arm stays in the forward position continuing to hold the towed vehicle brake pedal down until the RV moves forward a couple of inches to disengage it. Use of the ReadyBrake can decrease stopping distance by upwards of 30%.
CLEVIS CONNECTOR BLUE OX 2Pair of clevis connectors for a Atlas or Hercues tow bar to connect with a Blue Ox baseplate bracket on your towed vehicle. These will also connect to Demco brand baseplates that start with part number 9518 instead of 9517. These bolt on to the end of our steel tow bars legs with the bolts provided by NSA RV and installed at the factory. These clevis’s come with two 1/2” Red Handled pins to connect directly to the baseplates
|
CLEVIS CONNECTOR DEMCO TABLESS 2Pair of clevis connectors for a Atlas or Hercues tow bar to connect with a Demco Tabless baseplate bracket on your towed vehicle. These bolt on to the end of our steel tow bars legs with the bolts provided by NSA RV and installed at the factory. These clevis’s come with two 1/2” Red Handled pins to connect directly to the baseplates
|
CLEVIS CONNECTOR DEMCO CLASSIC 2Pair of clevis connectors for a Atlas or Hercues tow bar to connect with a Demco Classic baseplate bracket on your towed vehicle. These bolt on to the end of our steel tow bars legs with the bolts provided by NSA RV and installed at the factory. These clevis’s come with two 1/2” Red Handled pins to connect directly to the baseplates
CLEVIS CONNECTOR ROADMASTER 3/4" HOLE 2Pair of clevis connectors for a Atlas or Hercues tow bar to connect to a Roadmaster Direct-Connect baseplate or to an adaptor bar #067
which uses a 3/4” pin hole on your towed vehicle. These bolt on to the end of our steel tow bars legs with the bolts provided by NSA RV and installed at the factory. These clevis’s come with two 3/4” Red Handled pins to connect directly to the Roadmaster bracket. |
CLEVIS CONNECTOR ROADMASTER 1/2” HOLE 2Pair of clevis connectors for a Atlas or Hercues tow bar to connect with a Roadmaster Crossbar style baseplate or to an adaptor bar #025
which uses a 1/2” pin holes on your towed vehicle. These bolt on to the end of our steel tow bars legs with the bolts provided by NSA RV and installed at the factory. These clevis’s come with two 1/2” Red Handled pins to connect directly to the baseplate's bracket. |
