In-Dash Light Monitor DL-100

SKU: DL-100
$72.55
$72.55
Unavailable
per item

This monitor system will illuminate a red LED light on your motor home dash when the brake pedal in your towed vehicle is activated. Comes complete with a 50-foot cable, LED light, connectors, mounting hardware, and install instructions with wiring diagram.


Note:: The DL-100 in-dash light motoring system gets power from the brake pedal switch of the tow car. There are some rare cases where a different monitoring kit is needed because the tow car does not power its brake lights in “tow mode”. Put your tow car in “tow mode” and confirm that the brake lights illuminate when the brake pedal is depressed. Wait 10 minutes and test again, it’s very rare but some tow cars cut power after 10 minutes. If the brake lights are not illuminating, let us know as a different monitoring kit is needed.  


Note that the monitoring kit is just a dash light that illuminates if the brake is depressed, it has no effect on the core functions of the braking system. 



Ready Brake Monitor DL-100

NSA RV Products, Inc. In-Dash Monitor DL-100 connects to your towed vehicle brake pedal switch.  Know for sure when your towed vehicle brakes are being applied or not with this system.  This is the monitor system that was used with our older style ReadyBrake but we changed to the DL-300 monitor because some of the newer vehicles do not have power to the brake lights while towing.  If your towed vehicle does not display brake lights when you push the brake pedal down while in towed configuration (fuses pulled if required) then this system will not work since it requires power from the brake signal.